تستر قطعات LCR-T9

معرفی

LCR-T9 یک تستر چند منظوره با نمایشگر گرافیکی TFT است. می تواند به طور خودکار ترانزیستورهای NPN و PNP، FET های کانال N و P، دیودها (شامل دیودهای دوگانه)، مقاومت (شامل پتانسیومتر)، اندوکتانس، خازن، تریستورها، باتری ها (0.1-4.5V) را اندازه گیری کند. خاموش شدن خودکار (زمان خاموش شدن قابل تنظیم است، حالت منبع تغذیه دوگانه، تشخیص ولتاژ باتری لیتیومی، پشتیبانی از دو زبانه چینی و انگلیسی از دیگر ویژگی های این محصول است.

Description:
LCR-T9 is a multi-function tester with TFT graphic display. It can automatically measure NPN and PNP transistors, N-channel and P-channel FETs, diodes (including double diodes), resistance (including potentiometers), inductance, capacitance, thyristors , batteries (0.1-4.5V) and other components. With automatic calibration function. The measurement result adopts TFT graphic display, one-key operation, automatic shutdown (the shutdown time can be set, dual power supply mode, lithium battery voltage detection, support for Chinese and English bilingual, simple SMD component test area, external test port, internal system battery voltage detection.

Features:
The measurement result adopts TFT graphic display
Automatic shutdown (shutdown time can be set)
Dual power supply mode
Support Chinese and English bilingual
Internal system battery voltage detection

Specification:
Model: LCR-T9
Power supply voltage: DC9-12V (The external power interface is a DC 5.5V interface)
Current: 500mA
Battery model: 6F22 (9V/300mAh square carbon dry battery, not included)

Note:
The charging input voltage is up to 12V, please do not use overvoltage, otherwise the tester will be damaged!
Choose one of battery and power supply. They cannot be connected at the same time, otherwise it will cause the battery to explode and burn.
Automatic shutdown after timeout:
When the component test is completed and the automatic shutdown time is reached, the tester automatically shuts down.
Manual shutdown:
In any state, long press the multi-function button to force the shutdown, including when the component is being measured.
The multi-function tester can automatically identify the component and pin arrangement, and the range can be automatically switched.